Mig Welders (Tublar)

PARAMETER	MIG – 250	MIG – 250 GF
Input Power Voltage (v)	1P AC- 230 ± 15 %	3P AC -415± 15 %
Rated Input Capacity (K V A ) MIG , MMA	8.2 / 7.3	8.4/11.4
NO – Load Voltage	52 v	56 v
Diometer of the wire	0.8 – 1.0 mm	0.8 – 1.0 mm
Output Current Adjust Range (A)	50 – 250	50 – 250
DUT Y CYCLE (%)	60%	60%
Efficiency (%)	85%	85%
POWER FACTOR	0.93	0.93
No -Load POWER (W)	<100W	<100W
Insulation Class	F	F
Weight (KG)	26	17.5
Overall dimension (mm)	620× 405× 555	485× 234× 425

BASE MATERIAL	WELDING METHOD	WIRE DIAMETER (ɸ)	CURRENT RANGE (A)	APPLICABLE MODLE
Carbon steel ,Stainless steel Low – alloy steel
	CO2 / MAG	0.8 / 1.0	60 – 250	MIG – 250 S
	CO2 / MAG	0.8 / 1.0	60 – 250	MIG – 250 F
	CO2 / MAG	1.0 / 1.2	60 – 400	MIG – 400 IJ
	CO2 / MAG	1.0 / 1.2 / 1.6	60 – 500	MIG – 500 IJ
Austenitic Stainless Steel
	CO 2 /MAG	1.0 / 1.2 / 1.6	60 – 630	MIG – 630 IJ
	CO2 (Flux – cored wires)	1.2	60 – 400	MIG 400 IJ
	MIG (SOLID – CORED WIRES )	1.2	60 – 500	MIG 500 IJ
	CO2 (Flux – cored wires)	1.2 / 1.6	60 – 630	MIG 630 IJ